ACTi GNR-3000 Manual de usuario descargar pdf (Pagina 79)

www.acti.com

GNR-3000 System Administrator’s Manual

4. When the setting is finished, click “Apply” to save, then “Close” to exit this page. To check

or modify the regions you set, please go through clicking “Get Motion Settings”, Motion

Setup” and then “Motion Enable” buttons, the saved regions are already selected on the

list, select one to proceed.

Adjustment Attributes

Field Name

Description

Sensitivity(1-100)

Determines how sensitive the camera reacts to the movement. The higher

the sensitivity level is, the smaller motion will trigger the alarm, but may give

false alarms. Default is 70.

Timer(0-300 secs)

The interval before the next motion detection can be triggered again. Default

is 1 second.

Threshold (%)

The threshold level of this motion detection region. The lower threshold level

is, smaller portion of the region would be considered as motions, which is

more easily to be triggered, but may give more false alarms.

Note

1. If you have changed the motion detection settings via the web configurator, please remember

to come back to NVR and press “Get Device Settings”, then “Apply” to save to NVR. This is to

ensure that the settings in NVR are always in sync with the device.

2. If a motion region is set, once a movement is detected in this region, in live view:

(1) the red region frame will blink, and (2) a new alert entry will be generated in the event list.

3. PIR detection is available only for models with this function.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 149 150

Sin comentarios

ACTi GNR-3000 Manual de usuario Pagina 79