ACTi GNR-3000 Manual de usuario descargar pdf (Pagina 65)

www.acti.com

GNR-3000 System Administrator’s Manual

IP address

Enter the camera’s IP address or host name.

Brand

Select the manufacturer of device.

Model

Select the device model of the IP cameras / video servers. In most

cases, this is automatically filled in after you perform Get Device

Setting for ACTi cameras.

Stream Mode*

Select one of the streaming modes this device supports.

Channel No. *

The channel ID you set for a stream of a multi-streaming device.

HTTP Port

Enter the HTTP port for IP cameras/ video servers. Most cameras

use the default port number - 80.

User Name

Enter the user name to access the camera.

Password

Enter the password to access the camera.

Default Live View

Stream*

Choose the streaming id for Live View.

Recording Stream*

Choose the streaming id for Recording.

Connection

Timeout(0~99 secs)

Enter length of time allowed for a device to respond to NVR. If the

response is to late as to exceed this time, NVR will consider this

device “disconnected”. We recommend you to set different values for

different types of connection. The default setting is 5 seconds. For

devices located over the WAN, you may wish to increase this value to

allow for occasional Internet lags.

Available when NVR is connected to a multi-streaming device.

Available when NVR is connected to a device that is concurrently in multi-streaming mode (Dual

Stream mode excluded).

Available when NVR is connected to a multi-streaming device in Dual Stream mode.

Note

Current NVR version does not support ePTZ operation of 6VGA streaming mode. Please

define 6 VGA views through camera web configurator.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 149 150

Sin comentarios

ACTi GNR-3000 Manual de usuario Pagina 65