ACTi TCM-5311 Manual de usuario descargar pdf (Pagina 10)

www.acti.com

TCM-5311 Hardware User’s Manual

Step 3: Reconnect the power cable while continuing to hold the reset button. The red

Power LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for

another second and turn off again. By this time the reset to default operation is already

completed. This will take around 20 seconds from power up. You may then release the

reset button. This length of time fluctuates slightly with the environment. The Power LED light

will come back on and stay on after a few more seconds. The unit will start up with factory

default settings automatically.

On (3s)

Power On

About 20 Seconds

Stay On

Off (about 15s)

Off (10~15s)

Restore to Default

Complete

5) Audio Input / Output

The IP device supports audio input and output with earphone jack

6) Micro SD Card Slot*

Insert your Micro SD card here for local recording on camera

* Available only for device versions with enhancements

7) Digital Input / Output

Used in applications like motion detection, event triggering, time lapse recording, alarm

notifications, etc., the I/O terminal connector provides the interface to:

•1 transistor output - For connecting external devices such as relays and LEDs. Connected

devices can be activated by Output buttons on the Live View page or through video

management software.

•1 Digital Input - An alarm input for connecting devices that can toggle between an open and

closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. The device

will detect the change in digital input and transmit the signal to video surveillance servers.

•Auxiliary power and GND

Pin 1

GND

Ground

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

ACTi TCM-5311 Manual de usuario Pagina 10