ACTi TCM-6630 Manual de usuario

Busca en linea o descarga Manual de usuario para Cámaras De Seguridad ACTi TCM-6630. ACTi TCM-6630 User`s manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir

Indice de contenidos

Pagina 1 - TCM-6630

TCM-6630 36x Zoom H.264 IP D/N Outdoor Speed Dome Hardware User’s Manual Ver. 2012/6/25

Pagina 2 - Table of Contents

www.acti.com TCM-6630 Hardware User’s Manual 10 2) Dome Control Protocol To control PTZ action of this Speed Dome, the control pro

Pagina 3 - 4. Accessing Camera 51

www.acti.com TCM-6630 Hardware User’s Manual 11 7 MIC + 24 AWG 8 SPK + 9 MIC - 10 SPK - 11 ISOG 12 ALM-1 13

Pagina 4 - 0. Precautions

www.acti.com TCM-6630 Hardware User’s Manual 12 5) Dome ID Setting Use the switch to change your speed dome ID by turning the arro

Pagina 5 - 1. Introduction

www.acti.com TCM-6630 Hardware User’s Manual 13 6) Communication Switch Setting The table below shows the function of each pin wit

Pagina 6 - Features and Benefits

www.acti.com TCM-6630 Hardware User’s Manual 14 2. Installation Procedure Installing Speed Dome Cover 1) Remove the Plastic Protect

Pagina 7

www.acti.com TCM-6630 Hardware User’s Manual 15 3) Attach clear cover to speed dome There are a few micro-steps involved here.

Pagina 8 - Safety Instructions

www.acti.com TCM-6630 Hardware User’s Manual 16 Lastly use the small screw included in package to lock the dome cover into position.

Pagina 9 - Physical description

www.acti.com TCM-6630 Hardware User’s Manual 17 There are three locking areas on the mount kit. Put it on top of the speed dome, the

Pagina 10

www.acti.com TCM-6630 Hardware User’s Manual 18 Network Connection Follow the diagram below to connect the IP high speed dome to th

Pagina 11 -

www.acti.com TCM-6630 Hardware User’s Manual 19 Mounting Options for Speed Dome Wall Heavy Duty Wall Mount PMAX-0309 Heav

Pagina 12

www.acti.com TCM-6630 Hardware User’s Manual 2 Table of Contents 0. Precautions 4 1. Introduction 5 Package Contents ...

Pagina 13

www.acti.com TCM-6630 Hardware User’s Manual 20 Gooseneck Wall Mount - Raised PMAX-0307 Gooseneck Wall Mount - Flat PMAX-030

Pagina 14 - 2. Installation Procedure

www.acti.com TCM-6630 Hardware User’s Manual 21 Gooseneck Wall Mount + Junction Box PMAX-0306 + PMAX-0700

Pagina 15

www.acti.com TCM-6630 Hardware User’s Manual 22 Corner Heavy Duty Corner Mount PMAX-0309 + PMAX-0402 Heavy Duty Corner Mount

Pagina 16 - Connecting cables

www.acti.com TCM-6630 Hardware User’s Manual 23 Gooseneck Corner Mount PMAX-0306 + PMAX-0402 Gooseneck Corner Mount + Junction

Pagina 17

www.acti.com TCM-6630 Hardware User’s Manual 24 Pole Heavy Duty Pole Mount PMAX-0309 + PMAX-0502 Heavy Duty Pole Mount + Junc

Pagina 18 - Network Connection

www.acti.com TCM-6630 Hardware User’s Manual 25 Gooseneck Pole Mount PMAX-0306 + PMAX-0502 Gooseneck Pole Mount + Junction Box P

Pagina 19

www.acti.com TCM-6630 Hardware User’s Manual 26 Ceiling Pendant Mount PMAX-0109 Pendant Mount + Junction Box PMAX-0108 + PMAX-07

Pagina 20

www.acti.com TCM-6630 Hardware User’s Manual 27 3. Appendix OSD Menu Notes (On Screen Display) OSD Display Format The information s

Pagina 21

www.acti.com TCM-6630 Hardware User’s Manual 28  TCM-6630: Item Layer 1 Layer 2 Layer 3 Default DEFAULT CAMERA <ON>, <OFF

Pagina 22 - Corner

www.acti.com TCM-6630 Hardware User’s Manual 29 Item Layer 1 Layer 2 Layer 3 Default AUTOPAN CRUISE PRESET POINT SEQUENCE LINE AUT

Pagina 23

www.acti.com TCM-6630 Hardware User’s Manual 3 APERTURE...

Pagina 24

www.acti.com TCM-6630 Hardware User’s Manual 30 Item Layer 1 Layer 2 Layer 3 Default SET MONTH SET DAY SET HOUR SET MINUTE E

Pagina 25

www.acti.com TCM-6630 Hardware User’s Manual 31 The Backlight Compensation Level ranges from 000 to 100. FOCUS Automatica

Pagina 26 - Ceiling

www.acti.com TCM-6630 Hardware User’s Manual 32  MANUAL Select this item if you want to adjust aperture value manually. Higher val

Pagina 27 - 3. Appendix

www.acti.com TCM-6630 Hardware User’s Manual 33 degree Kelvin (K). You can select one of the White Balance Control modes according t

Pagina 28 - Default

www.acti.com TCM-6630 Hardware User’s Manual 34 SETUP MENU Users can adjust camera lens model parameters under SETUP MENUs. Dependin

Pagina 29

www.acti.com TCM-6630 Hardware User’s Manual 35  ZOOM SPEED This item is used to set the zoom speed for operating the dome camera.

Pagina 30 - Configuration Menu

www.acti.com TCM-6630 Hardware User’s Manual 36  ANGLE ADJUSTER The item is for adjusting the camera view angle. The ranges of vie

Pagina 31 - APERTURE

www.acti.com TCM-6630 Hardware User’s Manual 37 Follow the steps to set a camera title. (1) Operate speed dome to certain view a

Pagina 32 - WBC MODE

www.acti.com TCM-6630 Hardware User’s Manual 38  ALARM PIN The dome provides 8 alarm inputs and 2 outputs ( 1 x N.O. and 1 x N.C.)

Pagina 33 - ID DISPLAY

www.acti.com TCM-6630 Hardware User’s Manual 39 The Cruise line can be defined in CRUISE setup menu.  DWELL TIME The DWELL TIME i

Pagina 34 - SETUP MENU

www.acti.com TCM-6630 Hardware User’s Manual 4 0. Precautions Read these instructions You should read all the safety and operating i

Pagina 35

www.acti.com TCM-6630 Hardware User’s Manual 40  PRESET Select a preset point where the speed dome should go when alarm pin is tri

Pagina 36 - AX ANGLE 100 DEG

www.acti.com TCM-6630 Hardware User’s Manual 41  SEQUENCE LINE There are eight sets of sequence lines built in the speed dome came

Pagina 37 - ALARM SETTING

www.acti.com TCM-6630 Hardware User’s Manual 42  RUN SEQUENCE User can command the speed dome camera to run the selected Sequence

Pagina 38

www.acti.com TCM-6630 Hardware User’s Manual 43  DIRECTION The item is for setting the AUTOPAN direction of speed dome camera. The

Pagina 39 - HOME SETTING

www.acti.com TCM-6630 Hardware User’s Manual 44  RECORD START Follow the description to record the CRUISE path. 1. Rotate the spe

Pagina 40 - SEQENCE

www.acti.com TCM-6630 Hardware User’s Manual 45  AUTO The internal circuit will automatically decide the occasion to remove the IR

Pagina 41

www.acti.com TCM-6630 Hardware User’s Manual 46 AUTO If select <AUTO>, the speed dome camera operates the WDR function automat

Pagina 42 - TO FIND

www.acti.com TCM-6630 Hardware User’s Manual 47  SET MASK After pressing <ENTER> on this item, speed dome will memorize this

Pagina 43 - EXIT YES

www.acti.com TCM-6630 Hardware User’s Manual 48 LAST If select this mode, the camera will move the speed dome to the preset point, t

Pagina 44 - IR COLOR COLOR

www.acti.com TCM-6630 Hardware User’s Manual 49 Product Specification TCM-6630•DeviceDevice Type Speed Dome CameraImage Sensor Sony

Pagina 45 - WDR SETTING

www.acti.com TCM-6630 Hardware User’s Manual 5 1. Introduction Package Contents TCM-6630 Power Ada

Pagina 46 - PRIVACY

www.acti.com TCM-6630 Hardware User’s Manual 50 •AudioCompression 8 kHz, Mono, PCM, 16 bit encodingAudio-In 3.5 mm Phone J

Pagina 47

www.acti.com TCM-6630 Hardware User’s Manual 51 4. Accessing Camera If you have DHCP server / router in your network: Many network

Pagina 48 - EXIT OSD

www.acti.com TCM-6630 Hardware User’s Manual 52 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 19

Pagina 49 - Product Specification

www.acti.com TCM-6630 Hardware User’s Manual 53 If you are using a single camera, this is enough to access the device. If you a

Pagina 50

www.acti.com TCM-6630 Hardware User’s Manual 54 10. Click “Apply” 11. Please go to System -> Save & Reboot, and click ”App

Pagina 51 - 4. Accessing Camera

www.acti.com TCM-6630 Hardware User’s Manual 55

Pagina 52

www.acti.com TCM-6630 Hardware User’s Manual 6 Features and Benefits The IP High Speed Dome is designed to deliver superb performan

Pagina 53

www.acti.com TCM-6630 Hardware User’s Manual 7 H.264/MPEG-4/MJPEG Triple Codec Dual Streaming This device supports 3 compression for

Pagina 54

www.acti.com TCM-6630 Hardware User’s Manual 8 Safety Instructions Don’t use the power supply with other voltages This device is lik

Pagina 55

www.acti.com TCM-6630 Hardware User’s Manual 9 Physical description 1) Reset Button Step 1: Switch off IP device by disconnecting

Comentarios a estos manuales

Sin comentarios