ACTi ACM-4001 Manual de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 121
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
www.acti.com
* Latest product information: www.acti.com/product/
* Accessory information: www.acti.com/accessory/
89
ACD-2400
• Device
Device Type Video Encoder
Number of Channels 16
• PTZ
Protocol Pelco-D, Pelco-P V1 and V2, Dynacolor, Sony VISCA, American Dynamics
• Video
Compression MPEG-4 SP, MJPEG
Maximum Frame Rate vs.
Resolution
30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL)
30 fps at 640 x 480 (VGA, NTSC); 25 fps at 640 x 480 (VGA, PAL)
30 fps at 352 x 240 (CIF, NTSC); 25 fps at 352 x 288 (CIF, PAL)
30 fps at 160 x 112 (QCIF, NTSC); 25 fps at 176 x 144 (QCIF, PAL)
Multi-Streaming Multiple streams based on single conguration (per channel)
Bit Rate 28 Kbps - 3 Mbps (per stream)
Bit Rate Mode Constant, Variable
Image Enhancement Brightness; Saturation; Contrast
Privacy Mask 1 congurable region (per channel)
Text Overlay User dened text on video
Audio
Compression 8 kHz, Mono, PCM, 16 bit encoding
Audio-In Terminal block (per channel)
Audio-Out Terminal block (per channel)
• Network
Protocol & Service
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP,
UPnP, SNMP, Bonjour
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
Security IP address ltering; HTTPS encryption; Password protected user levels
Alarm
Alarm Trigger Video motion detection (3 regions per channel); External device through digital input
Alarm Response
Notify control center; Go to PTZ preset point or preset tour; Change camera settings;
Command other devices; E-mail notication with snapshots; Upload video, snapshot to FTP server;
Activate external device through digital output
• Interface
Analog Video Input 16, CVBS, 1.0Vp-p with 75Ω BNC connector
Digital Input 2, terminal block (per channel)
Digital Output 2, terminal block (per channel)
Serial Port RS-485, RS-422, RS-232, terminal block (per channel)
• General
Power Source /
Consumption
AC 100 - 240V (50/60 Hz) / 87 W
Weight 4.3 kg (9.47 lb)
Dimensions (W x H x D)
444 mm x 44.5 mm x 272 mm (17.48” x 1.75” x 10.72”)
Rack-mountable (1U)
Operating Temperature 0 °C ~ 50 °C (32 °F ~ 122 °F)
Operating Humidity 10% ~ 85% RH
Approvals CE, FCC
• Integration
Unied Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
Firmware Access Browser Microsoft Internet Explorer 6.0 or newer
PRODUCT SPECIFICATION
ACD-2400
Video Encoder
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 120 121

Comentarios a estos manuales

Sin comentarios