ACTi TCM-7811 Manual de usuario descargar pdf (Pagina 26)

www.acti.com

TCM-7811 Hardware User’s Manual

If you are using a single camera, this is enough to access the device.

If you are using multiple devices, you need to change the current device to another unused

IP address, so that when the next device is connected to the network, no two devices use

the same IP. Please perform the following steps.

7. Go to Network -> Connection Type

8. Change the IP mode to Static.

9. Change the IP to 192.168.0.101 or any other unused IPs. Do NOT use the PC’s IP address

or 192.168.0.100.). If this is not the first device you add to the network, please also avoid

other devices’ IPs.

10. Click “Apply”

11. Please go to Maintain -> Save & Reboot, and click ”Apply”. Internet Explorer will close after

a few seconds. This is normal.

1 2 ... 21 22 23 24 25 26 27

Sin comentarios

ACTi TCM-7811 Manual de usuario Pagina 26