
8
Firmware Version: A1D-500-V6.06.16-AC
Release Date: 2014.03.05 Reviewed Date: 2014.03.05
2. Please keep enable “RTP B2 Frame” on camera to prevent compatibility
problem with software NVR or standalone NVR.
3. Please check the motion region setting and privacy masking window after
changing video resolution.
4. After remove HTTPS certificate files, the WEB UI has to redirect to the login
page with HTTP protocol.
5. Please save and reboot the device after remove HTTPS certificate files.
6. Not support Motion detection regions and Privacy mask regions in non-IE
browser.
7. Not support MPEG4 CGI, this CGI is replaced with Encoder CGI.
8. When OSG function is activated, the snapshot function will be only available
from channel 1.
9. The “Ready for service” and “Service is not available” had been renamed to
“Device boots successfully” and “Reboot device” in Event triggered list.
10. H.264 level 5 is for 3M and higher video resolution, level 3 is for VGA and lower
and level 4 is for 720p and 1080p.
11. ONVIF Profile S will be supported in V6.06 version
12. ONVIF function is disabled by default. Please enable the ONVIF in “Network”
page from Web Configurator or by the following URL command for ONVIF
testing.
http://ip:port/cgi-bin/cmd/system?ONVIF_STATE=1 or
http://ip:port/cgi-bin/system?USER=admin&PWD=123456&ONVIF_STATE=1
(USER is camera’s root account name, PWD is password.)
13. FPS number of model I92/I94/I96 is 27 fps at 1080p resolution.
14. For High frame rate mode, image sensor output will up to 60FPS at 1280 x 720
resolution if the shutter speed is 1/100 sec or higher in the 50Hz power line
frequency environment.
15. For plug-in application in browser, it is recommended to install the browser
and then install the plug-in application.
16. QuickTime plug-in application is not available for 5M and above resolution
with H.264 Level 5.1.
17. PTZ control panel in web UI can configure up to 32 preset points and 32
preset tour points in a tour group. You can configure the additional preset
points up to 256 by using PTZ URL command.
18. When video resolution is 3648x2160, camera might not be able to switch back
to day mode.
Comentarios a estos manuales