ACTi ENR-130 Guía de instalación Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 139
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
www.acti.com
ENR-100 Series System Administrator’s Manual
55
Enable DHCP Server
You may enable the built-in DHCP server for either LAN1 or LAN2 port.
Go to Setup page Network tab click DHCP Server:
1. Check Enable and select a LAN, this LAN has to be in Manual mode.
2. Set the Beginning IP Address and Ending Address, and click Save. ENR will assign
IP addresses within this range to the cameras connected to the selected LAN port. Please
(1) make sure the cameras are in DHCP client mode, (2) connect and power the cameras up
after you enable this service.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 138 139

Comentarios a estos manuales

Sin comentarios